,

ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m


Item Parameter
Model ABL-20L
Power supply
DC 10.5V–24V/0.5V
Maximum current
TX: 15mA MAX  RX: 30mA  MAX
Optical source
Infrared Pulse
Infrared wave length
940nm
Infrared transmission frequency
1.92KHz
Response speed
50ms
Alarm output time
≥1s
Detection mode
Block off the infrared beam
Infrared angle
<±10°
Infrared distance
≤20m
Waterproof level IP55
Relay contact capacity
AC,DC30V,0.5A max
Working environment
Temperature: -25°C-+55°C; Humidity: RH95%
Product dimension
76*49*29mm

Compare
  • Product Description

    DC 12-24V Waterproof Outdoor Digital Photo Beam Sensor Active Single Infrared Beam Sensor: Single beam active intruder infrared detector with built-in AGC control circuit. The product can effectively prevent the interference from sunlight. the cell-shaped detector has beautiful structure with samll size. It is easy to be installed at wall, door, window, balcony, garage and other places.

    Working principle:  Infrared Beam Sensor is full named in “Active Infrared Intruction Detectors” . It mainly includes transmitter, Receiver, Beams, LED light, Lens and so on. The detection pnnciple is by using the LED infrared emission diode tread infrared pulse, then by the optical mirror focusing the light spread to deal with the far distance, last the receive get the infrared light. Then the infared pulse beam is blocked, it will alert. lnfrared is not-visible light, and will spread out; after emission, in the initial stages of the path will form a cone beam; with the increase of transmission distance , ideal emission intensity and the distance is inverse square attenuation of of of light.

    Features:

    – Fully sealed design, Rain-Proof(fog), Dust-Proof(worm)
    – With high levels of anti-RFI/EMI capability
    – Professional anti-jamming optical housing
    – Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.
    Narrow infrared beam (I or II) can avoid interruption by external light.
    – Even installed at low height (20-40cm from the floor), the detecting distance can also be guaranteed (5-15meters).
    – Single beam sensor/single beam detector is used for automatic slide door, coil door , garage door, windows etc.

    Item Parameter
    Model ABL-20L
    Power supply
    DC 10.5V–24V/0.5V
    Maximum current
    TX: 15mA MAX  RX: 30mA  MAX
    Optical source
    Infrared Pulse
    Infrared wave length
    940nm
    Infrared transmission frequency
    1.92KHz
    Response speed
    50ms
    Alarm output time
    ≥1s
    Detection mode
    Block off the infrared beam
    Infrared angle
    <±10°
    Infrared distance
    ≤20m
    Waterproof level IP55
    Relay contact capacity
    AC,DC30V,0.5A max
    Working environment
    Temperature: -25°C-+55°C; Humidity: RH95%
    Product dimension
    76*49*29mm

    Note:
    1>. This is Active Infrared Detector.  Install each pair at the opposite positions.  Then there is a infrared area between these two detector parts. When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here).
    2>. Install Distance(Max.)in the above chart means the maximum install distance between the two detector parts.
    Great to be installed for security system in school, office building, hosipital, home yard, garage door, etc.
    3>. Detecting range may be reduced to 30% in bad weather conditions, like as rain, more dust, etc.

    Single Infrared Beam Sensor 10m/20m/30m Range Photoelectric Infrared Detector

  • 1. Anti-glare up to 50,000 LUX, built-in automatic adjustment of strong light filtering system to avoid exposure to strong light or car lighting.
  • 2. All-weather integrated structure with full sealing, rainproof, dustproof, etc., makes it work in harsh environments.
  • 3. The detector automatically increases sensitivity when exposed to heavy fog or bad weather (AGC circuit).
  • 4. High-power transmitting device, photographic margin is up to 90%, high-power infrared receiving tube, low-power processing technology, lightning protection circuit design.
  • 5. Adjustable beam occlusion cycle makes it more flexible and adaptable.
  • 6. With rain cover design, C-type relay output.
  • This is Active Infrared Detector.Install each pair at the opposite positions.Then there is a infrared area between these two detector parts.
  • When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here).
  • Great to be installed for security system in school, office building, hosipital, home yard, etc.. Detecting range be reduced to 3% in bad weather conditions, like rain, dust, etc.
  • Anti-glare up to 50, 000 LUX, built-in automatic adjustment glare filter system, to avoid the impact of glare or car lights
  • Sealed design to anti-rain (fog), dust (worms) and other integrated weather, can keep normal operation in harsh environment
  • When faced with fog or inclement weather, the detector sensitivity will increase automatically(AGC circuit)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m”

There are no reviews yet.