



Sensor Switch 220V & 12V
UP TO 25% OFF
Special Offer
-
Motion Sensor's, Sensor's
Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
Motion Sensor's, Sensor'sInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
0 out of 5(0)Specifications:
Type: Sensor Switch
Material: ABS
Motion Angle: 180 Degree
Motion Distance: 2-8m / 6.6-26.2ft
Rotate Angle: 180 Degree
Working Voltage: 85-265V
Power: 30W
Waterproof: IP54
Installation Height: 1.8m- 2.5m / 5.9- 9.2ft
Work Temperature: -10 – 40 celsius
Work Humidity: Max 93%
Delay Time: 5+/-2 second – 4+/-1 min
Cable Length: 140mm / 5.5″
Item Size: 8*4.2*4cm / 3.1*1.7*1.6″(L*W*H)
Net Weight: 33g / 1.2ozSKU: n/a -
Electronic Components, HMI, LCD, PLC & HMI, Students Gallery
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
Electronic Components, HMI, LCD, PLC & HMI, Students GalleryTJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
0 out of 5(0)- Resolution: 400*240
- Serial port mode: 3.3V CMOS
- Working voltage: 4.75-7V
- Diagonal size of display area: 3.2 inch
- Interface mode: 4pin_XH2.54
3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 is a Seamless Human Machine Interface (HMI) solution. 3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly…
SKU: n/a -
Battery Charger, Digital Battery Charger, Generator Battery Charger
DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
Battery Charger, Digital Battery Charger, Generator Battery ChargerDTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
0 out of 5(0)FEATURES
- Model No: DTA-4158
- Input Voltage: 180 t 270V AC
- Out Voltage: 27.6V DC
- Current: 50A
- Digital Display for Volt and ampere.
- Digital Display for Ampere
- LEDBattery Status show
- Short Circuit Protection With Fuse
- 2 Stage Charging for Continuous Connection.
- Over Charge Protection
- Over current Protection.
- Low power consumption at no-load mode
- Reverse Discharge Protection.
- Two fans have been installed to keep the Battery Charger cool, which Automatically turns on during Heating
- Easy to Install
- Technology: Transformer Based
- Ampere Metre On the Front Panel for Show Battery Charging Status
- 63A ampere switch is used for main power
- 100A ampere switch is used for the DC Output
- The parameters are displayed on the front panel
- Color: Red
- Material: Copper Transformer and Metal Box
- DTA-2450 is charger is capable of charging any type of battery attached to the generator
- It automatically controls its amperes when the battery is fully charged
- This charger has the capacity to charge batteries from 15 amps to 500×2 amps.
- This charger is specially designed to slowly charge the continuous battery
- This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a -
Battery Charger, Generator Battery Charger
DTA-4072 Battery Charger 24V/5A For Generator
0 out of 5(0)FEATURES
- Model No: DTA-4072
- Input Voltage: 180 t 270V AC
- Out Voltage: 27.6V DC
- Current: 5A
- Short Circuit Protection With Fuse
- 2 Stage Charging for Continuous Connection.
- Over Charge Protection
- Over current Protection.
- Low power consumption at no-load mode
- Reverse Discharge Protection.
- Easy to Install
- Technology: Transformer Based
- Ampere Metre On the Front Panel for Show Battery Charging Status
- Color: Red
- Material: Copper Transformer and Metal Box
- Size: Approx. 210mm x 155mm x 100mm
- DTA-4059 is charger is capable of charging any type of battery attached to the generator
- It automatically controls its amperes when the battery is fully charged
- This charger has the capacity to charge batteries from 15 amps to 250×2 amps.
- This charger is specially designed to slowly charge the continuous battery
- This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a -
Boiler Controller, Water Pump Controller
DTA-11099 Water Level Switch For Boiler
0 out of 5(0)- Model No: DTA-11099
- Input Voltage 220V
- Rated Current: 12A Continuously
- It Can be Installed Very Easily
- 2 Wirer Sensing
- When the water touches the High level, the motor should stop
- After leaving the high level, the Motor should turn on after the time
- Microprocessor Based and very Efficient
SKU: n/a -
Infrared Beam Active Sensor, Sensor's
ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
Infrared Beam Active Sensor, Sensor'sABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
0 out of 5(0)Item Parameter Model ABL-20L Power supplyDC 10.5V–24V/0.5VMaximum currentTX: 15mA MAX RX: 30mA MAXOptical sourceInfrared PulseInfrared wave length940nmInfrared transmission frequency1.92KHzResponse speed50msAlarm output time≥1sDetection modeBlock off the infrared beamInfrared angle<±10°Infrared distance≤20mWaterproof level IP55 Relay contact capacityAC,DC30V,0.5A maxWorking environmentTemperature: -25°C-+55°C; Humidity: RH95%Product dimension76*49*29mmSKU: n/a -
Infrared Beam Active Sensor, Sensor's
IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Infrared Beam Active Sensor, Sensor'sIR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
0 out of 5(0)Technical Specifications:
Response speed: 50 to 700m/sec adjustable
Alarm output: 1C relay contact output, contact capability DC30v/0.5A max
Power and voltage: DC12~24V, AC 11~18V
Working temperature: -25 ~ 55 degree C
Tamper output: 1B contact output, DC30V/0.5A max
Optical axis adjust angle(horizontal): 180° (± 90° )
Optical axis adjust angle(vertical): 20° (± 10° )
Weight: 300g for transmitter; 300g for receiver; 1000g for each pack (including bracket)
Valid length: 17CMApplication. Indoor, OutdoorTransmission Mode.CableReceive Frequency.WiredIndoor Detecting Distance.50-150mWorking Temperature.-25 Degree ~ 55 DegreeWired or Wireless.WiredBeams.2 BeamsWorking Principle.Infrared– Relay OutputAlarm Volume (within 1m).Relay OutputHousing Color.BlackOutdoor Detecting Distance.50-150mValid Length.17cmRelay Output.No or NcSKU: n/a
-
AMF / ATS Controller, Generator
DTA-161 Genrator AMF / Auto Main Failure Card
0 out of 5(0)- DTA161 unit which is specially designed for Genset.
- It is used to start and stop the Genset in automatic or manual mode auto/manual switch on the panel. DTA161 is an Reliable Modle.
- DTA161 Just Auto Main failure Uint.
- When Main shutdown DTA161 satart the genrator & After Main comeback Stop theGenrator
- DTA161 have Three variables for Self On/off & Choke Off time settings .
- DC Supply: 12 volts, (+) and (-) terminals.
- Operating Voltage 220V
SKU: n/a -
AMF / ATS Controller, Generator
DTA-201 Generator AMF/ATS Control Card With Heater & Low Oil Pressure & High Temperature Switch Safety
AMF / ATS Controller, GeneratorDTA-201 Generator AMF/ATS Control Card With Heater & Low Oil Pressure & High Temperature Switch Safety
0 out of 5(0)Auto Main Failure and Automatic load transfer With Heater & Low Oil Pressure & High Temperature Switch Safety
- Microprocessor controled
- The Heater Turns on for About 9 Seconds Before Turning on the Self
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time Built in 14 Seconds
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
- There is an extra Switch to start and stop the generator manually
SKU: n/a -
Motion Sensor's, Sensor's
360 Degree PIR Motion Movement Sensor Switch 220-240V 1200W Time and LUX Adjustable Light Switch for LED Lights White
Motion Sensor's, Sensor's360 Degree PIR Motion Movement Sensor Switch 220-240V 1200W Time and LUX Adjustable Light Switch for LED Lights White
0 out of 5(0)Product Description
Quality control standard- 360 Degree Ceiling Mount PIR Motion-Sensor Lamp
- Operating volt: ac 220-250v 50hz-60hz.
- Load power: upto 300/1200w max
- Ambient light: 3-2000 (adjuestable)
- Load type: incandescent lamp, led light, clf, fans, etc
- Detecting distance: 0~7m
- Detecting angle: 360 degree.
- Installtion hight: 2.2-4 mtr
- Motion detetion speed: 0.6~1m/s
- Power cusumption: 0.1w (static) & 0.4(work)
- Working humidity: less than 93%rh
- Delay: 10 seconds -7 minutes (adjustable)
SKU: n/a -
Motion Sensor's, Sensor's
Motion Sensor Indoor Lighting PIR Sensor Switch Wall mounting auto on/Off Lights 220V
Motion Sensor's, Sensor'sMotion Sensor Indoor Lighting PIR Sensor Switch Wall mounting auto on/Off Lights 220V
0 out of 5(0)Features
- Material: Plastic
- White color
- Detection distance 0 to 7 meters
- Connection: single-wire system
- The principle of induction: infrared
- Own power: <0.0088 W / h
- Induction angle: 110 ° C – 140 ° C
- Light control induction: 5 lux- 500 lux (adjustable)
- Power supply: 110V-220 V AC (50 Hz)
- Power: 1 to 200 W
- Ambient temperature: -20 ° C – 50 ° C
- Dimensions: 85 x 85 x 24 mm
- Weight: 0.073 kg
SKU: n/a -
AMF / ATS Controller, Generator, Genset Starting Module
DTA-264 Generator AMF/ATS Control Module With Heater & Low Oil Pressure & High Temperature, Low High Voltage, Over Under frequency Safety
AMF / ATS Controller, Generator, Genset Starting ModuleDTA-264 Generator AMF/ATS Control Module With Heater & Low Oil Pressure & High Temperature, Low High Voltage, Over Under frequency Safety
0 out of 5(0)- Auto Main Failure and Automatic load transfer With Safety
- Microprocessor controled
- Manual start Optional
- Front panel mounting
- Front panel programming
- Configurable timers
- Ldc Display
- Main Shutdown timer
- Heater On Timer
- Crank On Timer
- Crank Rest Timer
- Generator on Load Timer
- Size : 165mm , 125mm , 45 mm
- Penal Cutout Size: 113mm X 152mm
- Generator Off Load Timer
- Main On Load Timer
- Generator Cooling Timer
- Choke On Timer
- Frecuency Delay Timer
- Frecuency High Limit
- Frecuency Lower Limit
- Warmup Timer
- Numebr of Start Attempts
- Main Voltage High Limit
- Main Voltage Lower Limit
- Generator Over Voltage high Limit
- Generator Under Voltage Limit
- DC Supply: 12V & 24volts, (+) and (-) terminals.
SKU: n/a -
Digital Over Undre Voltage Protection, Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5056 Low High Voltage Protection Digital
Digital Over Undre Voltage Protection, Low High Voltage Protection & Meter's, Over Under Voltage Protection CardDTA-5056 Low High Voltage Protection Digital
0 out of 5(0)- Model DTA 5056
- InPut Volt 500V Ac
- Rated Current 20Amp AC
- Stand by Current Consumption. 2.5 watt
- Automatic load On with Time Delay
- Digital Status Display
- 0 to 400 Sec time Delay
- There are Three Switchs for Setting low high And time.
- For Setting Press Enter Switch
- This is an over and under voltage protection to all electrical appliances are safe.
- Micro Processor Based sigle-phase Ac system 0 to 500V Monitoring over/under voltage value.
- The Unit will work all time in under or over voltage range.
- This unit will time delay all time when under or over voltage or power outage awhile.
- when the power falls to 180 volts (or much – less your set value) system will be shut down output.
- when the power is too high from 240 volts (or more your set value) system will be shut down & protect your Appliances.
SKU: n/a -
AMF / ATS Controller, Generator
DTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
AMF / ATS Controller, GeneratorDTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
0 out of 5(0)- Aoutmatic 2 main Lines And Generator Control Card
- This card is Specially Designed to Control Two WAPDA Meters and One Generator
- Meter 1 and Meter 2 automatically switch with time Delay Setting
- In case of both line shutdown, it starts the generator itself and shifts the load to the generator.
- If in-wapda 2 comes on while the generator is running, it shuts down the generator and turns it into Metter 2.and shifts the load to the Metter 2.
- In case of both Line 1 and Line 2 coming, the load of Line 1 will be transferred automatically
- Variables to Onload line one, line two, and line three
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
SKU: n/a -
Motion Sensor's, Sensor's
Outdoor LED Infrared PIR Motion Sensor Detector Wall Light Motion Sensor Light Switch Waterproof
Motion Sensor's, Sensor'sOutdoor LED Infrared PIR Motion Sensor Detector Wall Light Motion Sensor Light Switch Waterproof
0 out of 5(0)- Specification:
Color: black
Material: ABS
Working Rotation: 180°
IP Rating: Indoor application IP44
LUX Setting: 0-2000lux svr adjustable
Induction lighting time: 5s~8min adjustable time
Detection distance: Approx 12M, installation 1.5-2.5M High
Output: Maximum 1000W incandescent lamp, 100W fluorescent lamp ,Exhaust fan 100W, Motor 100W, Electric bell 100W
Size: approx. 4.5*5.5*15.5cm (H*W*L)
This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT, safe and practical.
SKU: n/a - Specification:
-
AMF / ATS Controller, Generator
DTA-110 Generator AMF/ATS Control Card With Heater Disele Generator
0 out of 5(0)- Auto Main Failure and Automatic load transfer unit
- Microprocessor controled
- The Heater Turns on for About Six Seconds Before Turning on the Self
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time Built in 40 Seconds
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
- There is an extra Switchs to start and stop the generator manually
SKU: n/a -
PWM Solar Charge Controller, Solar Charge controller, Solar Hybrid System
DST-4126 Solar Hybrid System Digital 12V,24V
PWM Solar Charge Controller, Solar Charge controller, Solar Hybrid SystemDST-4126 Solar Hybrid System Digital 12V,24V
0 out of 5(0)- Model No:DST 4126
- Voltage:12/24V
- Digital Solar ATS/Hybrid System.
- Solar ATS/Hybrid System Control Your UPS InPut 220V.
- Automatic Detection of voltage Solar Panel & Battery.
- UPS Input 220v Can Be Stopped When Battery Voltage & Solar Voltage Reaching The Set Value.
- When Solar Panel Volt/Battery Volt Down The Set Value Then Hybrid system Connect The UPS Input With Wapda Electricity.
- Intelligent Solar ATS/Hybrid System to minimize the use of Electricity and Maximize The Use of Solar Panel Energy
- In Order to Reduce Utility Bills.
SKU: n/a
-
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A With Temperature Time Clock Display
Mirror Touch Sensor, Sensor'sMirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A With Temperature Time Clock Display
0 out of 5(0)- Brand Name : Destta Reliablie
- Model: DST M12-G11-A40D
- Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
- Material: electronic components
- Size: 80x74x11mm
- Color: Black
- Style 1: Short press – open – close
- Style 2: Long press to adjust the light brightness, short press to turn on and off
- Style 3: Short press the light brightness to change to weak-medium-strong-off
- Style 4: it can control 2 colors of light strips, double output A-B-AB-off
- Optional Type: 1, 2, 3, 4
- Press Both Buttons Together to Set the Time
SKU: n/a -
AVR, Generator
SX460 AVR – Automatic Voltage Regulator Imported
0 out of 5(0)- SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement.
- INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
- OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum.
- Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient.
- Unit power dissipation: 10 watts maximum – Build up voltage:4 Volts @ AVR terminals.
- INPUT
Voltage: 220V AC Jumper selectable
Frequency: 50-60Hz nominal
Phase: 1OUTPUT
Voltage: max 90V DC at 207V AC Input
Current: continuous 4 A DC
Resistance: 15 ohms minimum
SKU: n/a -
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
Mirror Touch Sensor, Sensor'sMirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
0 out of 5(0)- Brand Name : Destta Reliablie
- Model: DST M12-G11-A30D
- Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
- Material: electronic components
- Size: 50x50mm/1.9×1.9in
- Color: Black
- Style 1: Short press – open – close
- Style 2: Long press to adjust the light brightness, short press to turn on and off
- Style 3: Short press the light brightness to change to weak-medium-strong-off
- Style 4: it can control 2 colors of light strips, double output A-B-AB-off
- Optional Type: 1, 2, 3, 4
SKU: n/a -
Motion Sensor's, Sensor's
PIR Motion Sensor Detector waterproof Outdoor 85-265V IP65 Motion Sensor Adjustable PIR Switch
Motion Sensor's, Sensor'sPIR Motion Sensor Detector waterproof Outdoor 85-265V IP65 Motion Sensor Adjustable PIR Switch
0 out of 5(0)- Specification
- Voltage: AC85-265V
- Material: ABS
- Detection range: 180 degrees
- Detection distance: 1-8M
- Ambient lighting: 2-2000 LUX (adjustable)
- Controllable Load: <100Watts
- Delay time: 3 seconds – 7 minutes (adjustable)
- Working temperature: -20 degrees Celsius – 45 degrees Celsius
- Installation height: 1.8m-3m
- Dimensions: 42*40*20mm
SKU: n/a -
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Automatic Day Night Sensor, Sensor'sLight Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
0 out of 5(0)- Photo Switch AS-20 AC 220V 10A
- Input voltage: AC220V
- Maximum load current: 10A
- Frequency: 50-60 Hz
- Power Consumption: 0.5 W Maximum
- Lumination operation
- On: less than 30 Lux
- Off: less than 150lux
-
(It can be adjusted according to the requirements
SKU: n/a
Best Sellers
Products Grid
- Best Deals
- HMI
- PLC & HMI
- Infrared Remote Controller's
- Water Level & Pump Controller
- Cloth Edge Control Card
- Peristaltic Dialysis Head Pump
- Medical & Textile
- DC Motor Drive
-
Motion Sensor's, Sensor's
Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
-
Electronic Components, HMI, LCD, PLC & HMI, Students Gallery
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
Recenly Added
DTA-912 Digital Duel Fuel Control System
DTA-912 Digital Duel Fuel Control System
DTA-1514 DC Motor Drive 12V,24V 20A
FEATURES
DTA-226 Consealed AVR Automatic Voltage Regulator For Generator
feature keys
DTA-9074 Burner Controller Unit Flame Rod Sensing
Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V

Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
Specifications:
Type: Sensor Switch
Material: ABS
Motion Angle: 180 Degree
Motion Distance: 2-8m / 6.6-26.2ft
Rotate Angle: 180 Degree
Working Voltage: 85-265V
Power: 30W
Waterproof: IP54
Installation Height: 1.8m- 2.5m / 5.9- 9.2ft
Work Temperature: -10 – 40 celsius
Work Humidity: Max 93%
Delay Time: 5+/-2 second – 4+/-1 min
Cable Length: 140mm / 5.5″
Item Size: 8*4.2*4cm / 3.1*1.7*1.6″(L*W*H)
Net Weight: 33g / 1.2oz
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen

TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 is a Seamless Human Machine Interface (HMI) solution. 3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly…
DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator

DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
FEATURES
DTA-4072 Battery Charger 24V/5A For Generator
FEATURES
DTA-11099 Water Level Switch For Boiler
ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m

ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
Item | Parameter |
Model | ABL-20L |
Power supply
|
DC 10.5V–24V/0.5V
|
Maximum current
|
TX: 15mA MAX RX: 30mA MAX
|
Optical source
|
Infrared Pulse
|
Infrared wave length
|
940nm
|
Infrared transmission frequency
|
1.92KHz
|
Response speed
|
50ms
|
Alarm output time
|
≥1s
|
Detection mode
|
Block off the infrared beam
|
Infrared angle
|
<±10°
|
Infrared distance
|
≤20m
|
Waterproof level | IP55 |
Relay contact capacity
|
AC,DC30V,0.5A max
|
Working environment
|
Temperature: -25°C-+55°C; Humidity: RH95%
|
Product dimension
|
76*49*29mm
|
IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)

IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Response speed: 50 to 700m/sec adjustable
Alarm output: 1C relay contact output, contact capability DC30v/0.5A max
Power and voltage: DC12~24V, AC 11~18V
Working temperature: -25 ~ 55 degree C
Tamper output: 1B contact output, DC30V/0.5A max
Optical axis adjust angle(horizontal): 180° (± 90° )
Optical axis adjust angle(vertical): 20° (± 10° )
Weight: 300g for transmitter; 300g for receiver; 1000g for each pack (including bracket)
Valid length: 17CM
DTA-4059 Battery Charger 12V/5A For Generator
FEATURES
DTA-4083 Battery Charger 12V/6A For Generator

DTA-4083 Battery Charger 12V/6A For Generator
FEATURES
DTA-106 ATS / Automatic Load Transfer Unit
This card is designed to automatically transfer between two WAPDA lines
DTA-525 Consealed AVR Automatic Voltage Regulator For Generator
Model No DTA-525 Consealed
DTA-225 Consealed AVR Automatic Voltage Regulator For Generator
Model No DTA-225 Consealed
DTA-625 Consealed AVR Automatic Voltage Regulator For Generator
Model No DTA-625 Consealed
DTA-695 AVR 100A Module type Automatic Voltage Regulator For Generator
Model No DTA-695 Module
DTA-695 AVR 100A Automatic Voltage Regulator For Generator
Model No DTA-695
Add Your Heading Text Here
Add Your Heading Text Here
- List Item #1
- List Item #2
- List Item #3