DTA-161 Genrator AMF / Auto Main Failure Card
- DTA161 unit which is specially designed for Genset.
- It is used to start and stop the Genset in automatic or manual mode auto/manual switch on the panel. DTA161 is an Reliable Modle.
- DTA161 Just Auto Main failure Uint.
- When Main shutdown DTA161 satart the genrator & After Main comeback Stop theGenrator
- DTA161 have Three variables for Self On/off & Choke Off time settings .
- DC Supply: 12 volts, (+) and (-) terminals.
- Operating Voltage 220V
₨1,000
Digitech Automation providers,
. Generator AVR Cards.
. Generator AMF/ATS & Safety Module.
. Battery Charger With Multi Range.
. AC/DC Drives.
. VS Motor Card.
. Programable Digital Timer & Counters.
. Temprature & Humidity Controllers.
. Solar Charge Controller & Solar Hybrid System.
. Pcb Desingning & Manufacturing.
Digitech Automation.
solution providers Automation,Hardware & firmware which is one of the Best &Trusted
company in pakitan.
for further details please contact # 0302 4459989.
also visit our facebook page “Digitech Automation LHR”
Head Office: Suite No.11,1st Floor Makkah Centre.
45 Mall Road Lahore. Ph.04237311323,0302 4459989.
Branch: Shop No.2 Al-Khalil Center 16-A Hall Road Lahore.
Phone No.042 37365346,0300 9499391,0321 4365594
0321 4355471,0323 4509860.
Based on 0 reviews
Be the first to review “DTA-161 Genrator AMF / Auto Main Failure Card”
Related products
-
AVR, Generator
DTA-625 AVR Automatic Voltage Regulator For Generator
Model No DTA-625
- Inpt Voltage: 220V AC
- Phase: Single 1
- Frecuency: 50hz – 60Hz
- Output Voltage: 0V To 90V Dc Maximum
- Current Max: 25A DC
- Continuous 13A-Dc Excitation Current
- Controls: Volt , Stab
- Quick response ( 25 ms )
- Thyristor Control Technology
- Suitable for 10 KVA 1000 KVA Brushless Generator
- Requires Only 4V-AC Residual Voltage to Buildup Alternator Voltage
- Easy to Install
- Repairable
- Low Cost
SKU: n/a -
AMF / ATS Controller, Generator, Genset Starting Module
DTA-264 Generator AMF/ATS Control Module With Heater & Low Oil Pressure & High Temperature, Low High Voltage, Over Under frequency Safety
AMF / ATS Controller, Generator, Genset Starting ModuleDTA-264 Generator AMF/ATS Control Module With Heater & Low Oil Pressure & High Temperature, Low High Voltage, Over Under frequency Safety
- Auto Main Failure and Automatic load transfer With Safety
- Microprocessor controled
- Manual start Optional
- Front panel mounting
- Front panel programming
- Configurable timers
- Ldc Display
- Main Shutdown timer
- Heater On Timer
- Crank On Timer
- Crank Rest Timer
- Generator on Load Timer
- Size : 165mm , 125mm , 45 mm
- Penal Cutout Size: 113mm X 152mm
- Generator Off Load Timer
- Main On Load Timer
- Generator Cooling Timer
- Choke On Timer
- Frecuency Delay Timer
- Frecuency High Limit
- Frecuency Lower Limit
- Warmup Timer
- Numebr of Start Attempts
- Main Voltage High Limit
- Main Voltage Lower Limit
- Generator Over Voltage high Limit
- Generator Under Voltage Limit
- DC Supply: 12V & 24volts, (+) and (-) terminals.
SKU: n/a -
AVR, Generator
Leroy Somer AVR R438 Automatic Voltage Regulator For Generator
Input voltage0-110V: 95-140V,
0-220V: 170-260V, 0-380V: 340-520V,
frequency50/60 Hz
,Rated overload current8 A up to 10 sec,
External voltage regulation0.47KΩ/0.5W: ±5%, 1.5KΩ/0.5W: ±10%.Operating temperaturefrom -20°С to +70°С,
Dimensions140x124x50 mm.Weight750
Voltage Regulation ±0.5% Remote voltage adjustment range ±0.5% Short circuit capability 3 x Irated for 10 seconds Standard power supply AREP or PMG Rated overload current 8 A – 10 s Voltage sensing 5 VA isolated via transforme 0-110V terminals 95 to 140V 0-220V terminals 170 to 260V 0-380V terminals 340 to 520V Voltage regulation ± 1% Current sensing C.T.2.5VA cl1,secondary 1 A Voltage sensing 95~140 volts (50/60 Hz) 170~260 volts (50/60 Hz) 340~520 volts (50/60 Hz) Fit for 1000 series generator 2000 series generator 3000 series generator SKU: n/a -
AMF / ATS Controller, Generator
DTA-127 Generator AMF/ATS Control Card
Auto Main Failure and Automatic load transfer unit
- Main Shutdown Time Adjustable
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
SKU: n/a
There are no reviews yet.