DTA-625 Consealed AVR Automatic Voltage Regulator For Generator
Model No DTA-625 Consealed
- This model is specially designed to protect against moisture and shocks
- Inpt Voltage: 220V AC
- Phase: Single 1
- Frecuency: 50hz – 60Hz
- Output Voltage: 0V To 90V Dc Maximum
- Current Max: 25A DC
- Continuous 13A-Dc Excitation Current
- Controls: Volt , Stab
- Quick response ( 25 ms )
- Thyristor Control Technology
- Suitable for 10 KVA 1000 KVA Brushless Generator
- Suitable for 10 KVA 30 KVA Slip Ring Generator
- Requires Only 4V-AC Residual Voltage to Buildup Alternator Voltage
- Easy to Install
- Low Cost
₨6,000
Digitech Automation providers,
. Generator AVR Cards.
. Generator AMF/ATS & Safety Module.
. Battery Charger With Multi Range.
. AC/DC Drives.
. VS Motor Card.
. Programable Digital Timer & Counters.
. Temprature & Humidity Controllers.
. Solar Charge Controller & Solar Hybrid System.
. Pcb Desingning & Manufacturing.
Digitech Automation.
solution providers Automation,Hardware & firmware which is one of the Best &Trusted
company in pakitan.
for further details please contact # 0302 4459989.
also visit our facebook page “Digitech Automation LHR”
Head Office: Suite No.11,1st Floor Makkah Centre.
45 Mall Road Lahore. Ph.04237311323,0302 4459989.
Branch: Shop No.2 Al-Khalil Center 16-A Hall Road Lahore.
Phone No.042 37365346,0300 9499391,0321 4365594
0321 4355471,0323 4509860.
Based on 0 reviews
Be the first to review “DTA-625 Consealed AVR Automatic Voltage Regulator For Generator”
Related products
-
AVR, Generator
DTA-625 AVR Automatic Voltage Regulator For Generator
Model No DTA-625
- Inpt Voltage: 220V AC
- Phase: Single 1
- Frecuency: 50hz – 60Hz
- Output Voltage: 0V To 90V Dc Maximum
- Current Max: 25A DC
- Continuous 13A-Dc Excitation Current
- Controls: Volt , Stab
- Quick response ( 25 ms )
- Thyristor Control Technology
- Suitable for 10 KVA 1000 KVA Brushless Generator
- Requires Only 4V-AC Residual Voltage to Buildup Alternator Voltage
- Easy to Install
- Repairable
- Low Cost
SKU: n/a -
AVR, Generator
R449 Automatic Voltage Regulator AVR R449 for Leroy Somer Generator
Specifications:
- Normal AVR supply power:2
- Auxiliary windings(X1,X2,and Z,Z2)
- Shunt supply:150V-50/60Hz
- Rated overload current:10A,10s
- Electronic built-in(overload,short circuit,and loss of sensing)
- Protection of power inputs by fuses F1
- Voltage Sensing:5VA insulated transformer with input voltage taps at:
- Terminals 0-110V=95 to 140V
- Terminals 0-220V=170 to 260V
- Terminals 0-380V=340 to 520V
SKU: n/a -
AMF / ATS Controller, Generator
DTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
AMF / ATS Controller, GeneratorDTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
- Aoutmatic 2 main Lines And Generator Control Card
- This card is Specially Designed to Control Two WAPDA Meters and One Generator
- Meter 1 and Meter 2 automatically switch with time Delay Setting
- In case of both line shutdown, it starts the generator itself and shifts the load to the generator.
- If in-wapda 2 comes on while the generator is running, it shuts down the generator and turns it into Metter 2.and shifts the load to the Metter 2.
- In case of both Line 1 and Line 2 coming, the load of Line 1 will be transferred automatically
- Variables to Onload line one, line two, and line three
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
SKU: n/a -
AVR, Generator
Leroy Somer AVR R438 Automatic Voltage Regulator For Generator
Input voltage0-110V: 95-140V,
0-220V: 170-260V, 0-380V: 340-520V,
frequency50/60 Hz
,Rated overload current8 A up to 10 sec,
External voltage regulation0.47KΩ/0.5W: ±5%, 1.5KΩ/0.5W: ±10%.Operating temperaturefrom -20°С to +70°С,
Dimensions140x124x50 mm.Weight750
Voltage Regulation ±0.5% Remote voltage adjustment range ±0.5% Short circuit capability 3 x Irated for 10 seconds Standard power supply AREP or PMG Rated overload current 8 A – 10 s Voltage sensing 5 VA isolated via transforme 0-110V terminals 95 to 140V 0-220V terminals 170 to 260V 0-380V terminals 340 to 520V Voltage regulation ± 1% Current sensing C.T.2.5VA cl1,secondary 1 A Voltage sensing 95~140 volts (50/60 Hz) 170~260 volts (50/60 Hz) 340~520 volts (50/60 Hz) Fit for 1000 series generator 2000 series generator 3000 series generator SKU: n/a
There are no reviews yet.