Leroy Somer AVR R438 Automatic Voltage Regulator For Generator
Input voltage0-110V: 95-140V,
0-220V: 170-260V, 0-380V: 340-520V,
frequency50/60 Hz
,Rated overload current8 A up to 10 sec,
External voltage regulation0.47KΩ/0.5W: ±5%, 1.5KΩ/0.5W: ±10%.Operating temperaturefrom -20°С to +70°С,
Dimensions140x124x50 mm.Weight750
| Voltage Regulation | ±0.5% |
| Remote voltage adjustment range | ±0.5% |
| Short circuit capability | 3 x Irated for 10 seconds |
| Standard power supply | AREP or PMG |
| Rated overload current | 8 A – 10 s |
| Voltage sensing | 5 VA isolated via transforme |
| 0-110V terminals | 95 to 140V |
| 0-220V terminals | 170 to 260V |
| 0-380V terminals | 340 to 520V |
| Voltage regulation | ± 1% |
| Current sensing | C.T.2.5VA cl1,secondary 1 A |
| Voltage sensing | 95~140 volts (50/60 Hz) |
| 170~260 volts (50/60 Hz) | |
| 340~520 volts (50/60 Hz) | |
| Fit for | 1000 series generator |
| 2000 series generator | |
| 3000 series generator |
₨21,000
Features
- 100% Brand New And High Quality.
- The R438 voltage regulator module can be powered by AREP or PMG field excitation system
- Detection input: Voltage 95-480V AC; Power supply input: Voltage 40-150V AC three-phase for this automatic voltage regulator
- Material: metal and plastic material voltage regulator, lightweight, tough and durable, can be used for a long time
- Magnetic field output: when voltage input is 120V AC, max is 160V DC, max 10A for this brushless generator AVR
- 95-480V automatic voltage regulator is a must-have item for your brushless generator
- We are confident the quality of our product is 100% qualified. If there is any question, feel free to contact us. We will offer the best service for you. Thank you!
Based on 0 reviews
Be the first to review “Leroy Somer AVR R438 Automatic Voltage Regulator For Generator”
Related products
-
AMF / ATS Controller, Generator
DTA-127 Generator AMF/ATS Control Card
Auto Main Failure and Automatic load transfer unit
- Main Shutdown Time Adjustable
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load Time
- Generator Cool Down Time
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
SKU: n/a -
AMF / ATS Controller, Generator
DTA-126 Genrator AMF Card
- DTA126 unit which is specially designed for Genset.
- It is used to start and stop the Genset in automatic or manual mode auto/manual switch on the panel. DTA126 is an Reliable Modle.
- DTA126 Just Auto Main failure Uint.
- When Main shutdown DTA126 satart the genrator & After Main comeback Stop the Genrator.
- DTA126 have Three variables for Self On/off & Main On time settings .
- DC Supply: 12 volts, (+) and (-) terminals.
SKU: n/a -
AVR, Generator
GAVR-12A GAVR 12A AVR for Generator Automatic Voltage
TECHNICAL DATA:
Voltage Set-up:The voltage set up when the remnant magnetism greater than 4V 25Hz
Input power Supply:AC 160~260V 50/60Hz
Maximum Output: DC 5A 95V(when the voltage reaches AC 240V)
Frequency Compensation:Built-in low speed protective circuit.INPUT:
Voltage Jumper selectable
95-132V ac or 190-264 Hz nominal
Frequency 50-60 Hz nominal
OUTPUT:
Voltage max 90V dc at 207V ac input
Current continuous 2A dc
Intermittent 5A for 10 secs
Resistance 20 ohms minimum
REGULATION: +/-1%This is one kinds of currency AVRs for brushless generators in the world.
TECHNICAL DATA:
INPUT:
Voltage :160-260V AC
Frequency :50-60 Hz nominalSKU: n/a -
AMF / ATS Controller, Generator, Genset Starting Module
DKG105 DATAKOM Generator Automatic Mains Failure control panel
AMF / ATS Controller, Generator, Genset Starting ModuleDKG105 DATAKOM Generator Automatic Mains Failure control panel
DKG-105 AUTOMATIC MAINS FAILURE UNIT
The DKG-105 automatic mains failure unit is a microprocessor based digital unit offering all functions needed for the automatic control of a genset.
The unit fits into a standard 72x72mm panel meter opening and offers a very cost effective and
space saving solution for the basic genset control.
In automatic mode, the unit monitors 3 phases of the mains voltage and controls the automatic starting, stopping and load transfer of the generator.
Once the generator is running, the device monitors the internal protections and external fault inputs.
DKG-105 provides a full set of digitally adjustable timers and threshold levels. Also the relay configuration is programmable, enabling the control of various types of engines, including gasoline engines.
The programs may be modified by the customer via pushbuttons on the unit, and do not require an external unit.
Automatic engine starting and stopping Gas engine support
Automatic mains failure monitoring
Automatic load transfer
Automatic shutdown on fault condition
Test mode available
Survives cranking dropouts
Digital engine run-hours display
Provision for energize to stop, preheat & choke outputs
Mains phases voltage limits checking
Generator phase voltage limits checking
SKU: n/a
There are no reviews yet.