Product Carousel Tabs
Infrared Beam Active Sensor, Sensor's
IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Infrared Beam Active Sensor, Sensor's
IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Technical Specifications:
Response speed: 50 to 700m/sec adjustable
Alarm output: 1C relay contact output, contact capability DC30v/0.5A max
Power and voltage: DC12~24V, AC 11~18V
Working temperature: -25 ~ 55 degree C
Tamper output: 1B contact output, DC30V/0.5A max
Optical axis adjust angle(horizontal): 180° (± 90° )
Optical axis adjust angle(vertical): 20° (± 10° )
Weight: 300g for transmitter; 300g for receiver; 1000g for each pack (including bracket)
Valid length: 17CM
Response speed: 50 to 700m/sec adjustable
Alarm output: 1C relay contact output, contact capability DC30v/0.5A max
Power and voltage: DC12~24V, AC 11~18V
Working temperature: -25 ~ 55 degree C
Tamper output: 1B contact output, DC30V/0.5A max
Optical axis adjust angle(horizontal): 180° (± 90° )
Optical axis adjust angle(vertical): 20° (± 10° )
Weight: 300g for transmitter; 300g for receiver; 1000g for each pack (including bracket)
Valid length: 17CM
Application. Indoor, Outdoor
Transmission Mode.Cable
Receive Frequency.Wired
Indoor Detecting Distance.50-150m
Working Temperature.-25 Degree ~ 55 Degree
Wired or Wireless.Wired
Beams.2 Beams
Working Principle.Infrared– Relay Output
Alarm Volume (within 1m).Relay Output
Housing Color.Black
Outdoor Detecting Distance.50-150m
Valid Length.17cm
Relay Output.No or Nc
SKU: n/a
Infrared Beam Active Sensor, Sensor's
ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
Infrared Beam Active Sensor, Sensor's
ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
| Item | Parameter |
| Model | ABL-20L |
|
Power supply
|
DC 10.5V–24V/0.5V
|
|
Maximum current
|
TX: 15mA MAX RX: 30mA MAX
|
|
Optical source
|
Infrared Pulse
|
|
Infrared wave length
|
940nm
|
|
Infrared transmission frequency
|
1.92KHz
|
|
Response speed
|
50ms
|
|
Alarm output time
|
≥1s
|
|
Detection mode
|
Block off the infrared beam
|
|
Infrared angle
|
<±10°
|
|
Infrared distance
|
≤20m
|
| Waterproof level | IP55 |
|
Relay contact capacity
|
AC,DC30V,0.5A max
|
|
Working environment
|
Temperature: -25°C-+55°C; Humidity: RH95%
|
|
Product dimension
|
76*49*29mm
|
SKU: n/a
Boiler Controller, Water Pump Controller
DTA-11099 Water Level Switch For Boiler
Model No: DTA-11099
Input Voltage 220V
Rated Current: 12A Continuously
It Can be Installed Very Easily
2 Wirer Sensing
When the water touches the High level, the motor should stop
After leaving the high level, the Motor should turn on after the time
Microprocessor Based and very Efficient
SKU: n/a
Battery Charger, Generator Battery Charger
DTA-4072 Battery Charger 24V/5A For Generator
FEATURES
Model No: DTA-4072
Input Voltage: 180 t 270V AC
Out Voltage: 27.6V DC
Current: 5A
Short Circuit Protection With Fuse
2 Stage Charging for Continuous Connection.
Over Charge Protection
Over current Protection.
Low power consumption at no-load mode
Reverse Discharge Protection.
Easy to Install
Technology: Transformer Based
Ampere Metre On the Front Panel for Show Battery Charging Status
Color: Red
Material: Copper Transformer and Metal Box
Size: Approx. 210mm x 155mm x 100mm
DTA-4059 is charger is capable of charging any type of battery attached to the generator
It automatically controls its amperes when the battery is fully charged
This charger has the capacity to charge batteries from 15 amps to 250×2 amps.
This charger is specially designed to slowly charge the continuous battery
This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a
Battery Charger, Digital Battery Charger, Generator Battery Charger
DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
Battery Charger, Digital Battery Charger, Generator Battery Charger
DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
FEATURES
Model No: DTA-4158
Input Voltage: 180 t 270V AC
Out Voltage: 27.6V DC
Current: 50A
Digital Display for Volt and ampere.
Digital Display for Ampere
LEDBattery Status show
Short Circuit Protection With Fuse
2 Stage Charging for Continuous Connection.
Over Charge Protection
Over current Protection.
Low power consumption at no-load mode
Reverse Discharge Protection.
Two fans have been installed to keep the Battery Charger cool, which Automatically turns on during Heating
Easy to Install
Technology: Transformer Based
Ampere Metre On the Front Panel for Show Battery Charging Status
63A ampere switch is used for main power
100A ampere switch is used for the DC Output
The parameters are displayed on the front panel
Color: Red
Material: Copper Transformer and Metal Box
DTA-2450 is charger is capable of charging any type of battery attached to the generator
It automatically controls its amperes when the battery is fully charged
This charger has the capacity to charge batteries from 15 amps to 500×2 amps.
This charger is specially designed to slowly charge the continuous battery
This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a
Electronic Components, HMI, LCD, PLC & HMI, Students Gallery
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
Electronic Components, HMI, LCD, PLC & HMI, Students Gallery
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
Resolution: 400*240
Serial port mode: 3.3V CMOS
Working voltage: 4.75-7V
Diagonal size of display area: 3.2 inch
Interface mode: 4pin_XH2.54
3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 is a Seamless Human Machine Interface (HMI) solution. 3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly…
SKU: n/a
Motion Sensor's, Sensor's
Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
Motion Sensor's, Sensor's
Infrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250VInfrared Motion Sensor Pir Body Sensor Switch Infrared Motion Sensor Detector for Led Lamp Home Garden 90~250V
Specifications:
Type: Sensor Switch
Material: ABS
Motion Angle: 180 Degree
Motion Distance: 2-8m / 6.6-26.2ft
Rotate Angle: 180 Degree
Working Voltage: 85-265V
Power: 30W
Waterproof: IP54
Installation Height: 1.8m- 2.5m / 5.9- 9.2ft
Work Temperature: -10 – 40 celsius
Work Humidity: Max 93%
Delay Time: 5+/-2 second – 4+/-1 min
Cable Length: 140mm / 5.5″
Item Size: 8*4.2*4cm / 3.1*1.7*1.6″(L*W*H)
Net Weight: 33g / 1.2oz
SKU: n/a
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Photo Switch AS-20 AC 220V 10A
Input voltage: AC220V
Maximum load current: 10A
Frequency: 50-60 Hz
Power Consumption: 0.5 W Maximum
Lumination operation
On: less than 30 Lux
Off: less than 150lux
(It can be adjusted according to the requirements
SKU: n/a
Motion Sensor's, Sensor's
PIR Motion Sensor Detector waterproof Outdoor 85-265V IP65 Motion Sensor Adjustable PIR Switch
Motion Sensor's, Sensor's
PIR Motion Sensor Detector waterproof Outdoor 85-265V IP65 Motion Sensor Adjustable PIR Switch
Specification
Voltage: AC85-265V
Material: ABS
Detection range: 180 degrees
Detection distance: 1-8M
Ambient lighting: 2-2000 LUX (adjustable)
Controllable Load: <100Watts
Delay time: 3 seconds – 7 minutes (adjustable)
Working temperature: -20 degrees Celsius – 45 degrees Celsius
Installation height: 1.8m-3m
Dimensions: 42*40*20mm
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
Brand Name : Destta Reliablie
Model: DST M12-G11-A30D
Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
Material: electronic components
Size: 50x50mm/1.9×1.9in
Color: Black
Style 1: Short press – open – close
Style 2: Long press to adjust the light brightness, short press to turn on and off
Style 3: Short press the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off
Optional Type: 1, 2, 3, 4
SKU: n/a
AVR, Generator
SX460 AVR – Automatic Voltage Regulator Imported
SX460 AVR – Automatic Voltage Regulator – Exact Generic Replacement.
INPUT: Voltage: Jumper selectable 95-132V ac or 190-264V ac, Frequency: 50-60 Hz nominal, Phase: 1
OUTPUT: Voltage: Max 90V dc at 207V ac input, Current: Continuous 4 A dc, Intermittent 6 A for 10 secs, Resistance: 15 ohms minimum.
Regulation: +/-1.0% * Thermal drift: 0.05% per deg. C change in AVR ambient.
Unit power dissipation: 10 watts maximum – Build up voltage：4 Volts @ AVR terminals.
INPUT
Voltage: 220V AC Jumper selectable
Frequency: 50-60Hz nominal
Phase: 1OUTPUT
Voltage: max 90V DC at 207V AC Input
Current: continuous 4 A DC
Resistance: 15 ohms minimum
Voltage: 220V AC Jumper selectable
Frequency: 50-60Hz nominal
Phase: 1OUTPUT
Voltage: max 90V DC at 207V AC Input
Current: continuous 4 A DC
Resistance: 15 ohms minimum
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A With Temperature Time Clock Display
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A With Temperature Time Clock Display
Brand Name : Destta Reliablie
Model: DST M12-G11-A40D
Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
Material: electronic components
Size: 80x74x11mm
Color: Black
Style 1: Short press – open – close
Style 2: Long press to adjust the light brightness, short press to turn on and off
Style 3: Short press the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off
Optional Type: 1, 2, 3, 4
Press Both Buttons Together to Set the Time
SKU: n/a
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5038 3Phase Failure and Phase Sequence Control Card
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5038 3Phase Failure and Phase Sequence Control Card
Model No: DTA5038
3 Phase over and under voltage protection and Phase Sequence Control Card to all electrical appliances are safe
Rated Current 10Amp AC
Automatic load On with Time Delay 3 Sec
Micro Processor Based sigle-phase Ac system 0 to 300V Monitoring over/under voltage value per Phase
The Unit will work all time in under or over voltage range 170V to 260V per Phase
when the power falls of any phase to 170 volts (or much – less your set value) system will be shut down output.
when the power is too high of any phase from 260 volts (or more your set value) system will be shut down & protect your Appliances.
SKU: n/a
AVR, Generator
DTA-226 Consealed AVR Automatic Voltage Regulator For Generator
feature keys
Model No DTA-226 Consealed
This model is specially designed to protect against moisture and shocks
Inpt Voltage: 220V AC
Phase: Single 1
Frecuency: 50hz – 60Hz
Output Voltage: 0V To 90V Dc Maximum
Current Max: 25A DC
Continuous 13A-Dc Excitation Current
Controls: Volt , Stab
Quick response ( 20 ms )
Thyristor Control Technology
Suitable for 10 KVA 1000 KVA Brushless Generator
Requires Only 2V-AC Residual Voltage to Buildup Alternator Voltage
Easy to Install
Low Cost
SKU: n/a
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5050 Low High Voltage Protection
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5050 Low High Voltage Protection
This is an over and under voltage protection to all electrical appliances are safe.
Model DTA 5050
InPut Volt 500V Ac
Rated Current 10 Amp AC
Automatic load On with Time Delay
. Micro Processor Based sigle-phase Ac system 0 to 300V Monitoring over/under voltage value.
The Unit will work all time in under or over voltage range.
This unit will time delay all time when under or over voltage or power outage awhile.
when the power falls to 180 volts (or much – less your set value) system will be shut down output.
when the power is too high from 240 volts (or more your set value) system will be hut down & protect your Appliances.
SKU: n/a
Infrared Remote Controller's
DTA-17021 Infrared Remot Control For Room 7 Switch With 2 Fan Dimmer Low High
Infrared Remote Controller's
DTA-17021 Infrared Remot Control For Room 7 Switch With 2 Fan Dimmer Low High
Operating Voltage 220V AC
9 Channels ON-OFF digital intelligent wireless remote control switch.
1/2/3/4/5/6/7 & 2 Fan Control Low High Speed Wireless On/Off Lamp With IR Remote Control Switch.
Load Current: 100 Watt each Switch
Infrared Remote Range 8 Metre
When the Power Gose off and on Again, The Memory is preserved
Its very Reliable & Repairable Product Suitable for droplight, crystal lamp, modern low-pressure lamp, absorb dome light, day flower lamp, fluorescent lamp, energy-saving lamps, exhaust fan, etc.
Repairable
Can use Switchboard and Remote at the Same Time
Button for Reset on the Circuit Board and Handset Remote
Press the Red Button to Close all Switches Simultaneously
SKU: n/a
Motion Sensor's, Sensor's
40mm AC 220V Infrared PIR Motion Sensor Automatically Light On Off Sensor
Specifications:
Type: PIR Switch
Color: White
Working Voltage/Frequency:AC100-240V, 50/60Hz
Output power : ≤40W
Photo sensing Setting:≤2Lux, ≤25Lux, 2000Lux
Sensing Distance: 4-6m
Time delaya djustment :15secs 45secs 5mins
Angle Coverage: 110°
Extreme Temperature Using:-10°—+45°
Stand by power consumption:<0.1W
Size:45 mmx 40mm x 25mm
Package Contents:
1 x PIR Motion SensorSwitch
SKU: n/a
Boiler Controller, Ignition Controller
DTA-21026 Spark Ignition Professional Factory Continuous Working 220V High Volt
Boiler Controller, Ignition Controller
DTA-21026 Spark Ignition Professional Factory Continuous Working 220V High Volt
Description
Model NO. DST 21026
Brand:Destta Reliable
220V Gas Burner Igniter
Usage:Combined Transformer, Power Transformer
Frequency Characteristics:High Frequency
Shape of Core:EE
Size(L×W×H): 60×41×29mm
Input Voltage: 220V
Output Voltage: 12KVA
Igniting Distance: 5-8mm
Working Frequency: 50HZ
Length Of Input Wire: 300mm
Length Of Output Wire: 800mm
Lifetime: ≥100,000 times
Ignition Material : electronic epoxy resinsealant encapsulating, waterproof and damp proof.
Notes:Above data are manufacturer standard, can also be customized as your requires.
Name:High Voltage Igniter
Applicability:
Gas Burner/Stove, Oil Furnace
SKU: n/a
Battery Charger, Generator Battery Charger, SMPS Battery Charger
DTA-4083 Battery Charger 12V/6A For Generator
Battery Charger, Generator Battery Charger, SMPS Battery Charger
DTA-4083 Battery Charger 12V/6A For Generator
FEATURES
Model No: DTA-4083
Input Voltage: 140 t 270V AC
Out Voltage: 13.8V DC
Current: 6A
Short Circuit Protection
2 Stage Charging for Continuous Connection.
Over Charge Protection
Over current Protection.
Low power consumption at no-load mode
Reverse Discharge Protection.
Reverse Polarity Connection protection.
Easy to Install
Low Cost
This model is specially designed to protect against moisture and shocks
Technology: Switchmode
SKU: n/a
Different Types Of Sensor's, Sensor's
Hand Sweep Sensor Light ON – OFF & Hold Soft Dimmer Control Duel Color
Different Types Of Sensor's, Sensor's
Hand Sweep Sensor Light ON – OFF & Hold Soft Dimmer Control Duel Color
Brand Name : Destta Reliablie
Model: DST M12-G11-A32D
Input Voltage 12V
Output Voltage 12V 3A
Color: Black
Style 1: Hand Sweep– open – close
Style 2: Long Hand Stop to adjust the light brightness, short press to turn on and off
Style 3: Hand Sweep the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off
Optional Type: 1, 2, 3, 4
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch On/Off for Led Light 12V 3A
Brand Name : Destta Reliablie
Model: DST M12-G11-A26
Item Type: Mirror Touch Sensor Switch ON/OFF
Material: electronic components
Size: 50x50mm/1.9×1.9in
Color: Black
Style 1: Short press – On
Style 2: Short press – Off
Voltage: 5-12V 3A
Load power: 10W
Sensing Range: 5mm
SKU: n/a
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5059 3Phase Failure and Phase Sequence Control Card
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5059 3Phase Failure and Phase Sequence Control Card
Model No: DTA5059
3 Phase over and under voltage protection and Phase Sequence Control Card to all electrical appliances are safe
Rated Current 10Amp AC
Automatic load On with Time Delay 3 Sec
Micro Processor Based sigle-phase Ac system 0 to 300V Monitoring over/under voltage value per Phase
The Unit will work all time in under or over voltage range 170V to 260V per Phase
when the power falls of any phase to 170 volts (or much – less your set value) system will be shut down output.
when the power is too high of any phase from 260 volts (or more your set value) system will be shut down & protect your Appliances.
SKU: n/a
DC Motor Drive, Motor Drive's
DTA-1514 DC Motor Drive 12V,24V 20A
FEATURES
Model No: DTA-1514
Input Voltage: 30v DC
Out Voltage: 2V to 24V DC
Current: 20A
Technology: PWM
Speed Control With Volume
Switch For Strat & Stop
Size: Approx. 100 x 95 x 40mm
Input Output Led Indicators
Easy to Install
SKU: n/a
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5051 Low High Voltage Protection With Capsiter Supply
Low High Voltage Protection & Meter's, Over Under Voltage Protection Card
DTA-5051 Low High Voltage Protection With Capsiter Supply
This is an over and under voltage protection to all electrical appliances are safe.
Model DTA 5051
InPut Volt 300V Ac
Rated Current 10 Amp AC
Automatic load On with Time Delay
Micro Processor Based sigle-phase Ac system 0 to 300V Monitoring over/under voltage value.
The Unit will work all time in under or over voltage range.
This unit will time delay all time when under or over voltage or power outage awhile.
when the power falls to 180 volts (or much – less your set value) system will be shut down output.
when the power is too high from 240 volts (or more your set value) system will be hut down & protect your Appliances.
SKU: n/a
AVR, Generator
R230 AVR Automatic Voltage Regulator for Single-Phase Two-Wire Generator
100% brand new and high quality.
This product is a AVR(Automatic Voltage Regulator) for brushless alternator with adjustable voltage.
The regulator monitors the exciter excitation current as a function of the alternator output voltage.
Very simple in design, the alternator with shunt excitation has no sustaining short-circuit capacity.
Made with flame retardant and heat resisting material, stable and reliable to use.
Input
Voltage 85-139 VAC
Frequency 50-60 Hz nominal
Output
Voltage max 75 V DC at 100V AC input
Current continuous 4A DC
Intermittent 8A
Resistance 15 ohms minimum
Regulation +/- 0.5%
Voltage 85-139 VAC
Frequency 50-60 Hz nominal
Output
Voltage max 75 V DC at 100V AC input
Current continuous 4A DC
Intermittent 8A
Resistance 15 ohms minimum
Regulation +/- 0.5%
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch & Hold Soft Dimmer for Led Light 12V 3A
Brand Name : Destta Reliablie
Model: DST M12-G11-A20
Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
Material: electronic components
Size: 50x50mm/1.9×1.9in
Color: Black
Style 1: Short press – On
Style 2: Long press to adjust the light brightness Low
Style 3: Long press the light brightness High
Style 4: Short press – Off
Optional Type: On/Off With Soft Dimmer
Voltage: 5-12V 3A
Load power: 10W
Sensing Range: 5mm
SKU: n/a
AMF / ATS Controller, Generator
DTA-127 Generator AMF/ATS Control Card
Auto Main Failure and Automatic load transfer unit
Main Shutdown Time Adjustable
Self On/Off Time Setting
Genset On Load Time & Genset Off Load Time
Main On Load Time
Generator Cool Down Time
Failed To Start Indication LED
Excellent Ability to Start and Stop the Generator
DC Supply: 12 Volts, (+) and (-) Terminals.
Indicators to show card performance
Capability to transfer loads without DC 12 volts
SKU: n/a
Battery Charger, Generator Battery Charger
DTA-4059 Battery Charger 12V/5A For Generator
FEATURES
Model No: DTA-4059
Input Voltage: 140 t 270V AC
Out Voltage: 13.4V DC
Current: 5A
Short Circuit Protection With Fuse
2 Stage Charging for Continuous Connection.
Over Charge Protection
Over current Protection.
Low power consumption at no-load mode
Reverse Discharge Protection.
Easy to Install
Technology: Transformer Based
Ampere Metre On the Front Panel for Show Battery Charging Status
Color: Red
Material: Copper Transformer and Metal Box
Size: Approx. 210mm x 155mm x 100mm
DTA-4059 is charger is capable of charging any type of battery attached to the generator
It automatically controls its amperes when the battery is fully charged
This charger has the capacity to charge batteries from 15 amps to 250 amps.
This charger is specially designed to slowly charge the continuous battery
This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a
PWM Solar Charge Controller, Solar Charge controller
DST-2450 Solar Charge Controller PWM With Hybrid System 12V/24V 50A HB
PWM Solar Charge Controller, Solar Charge controller
DST-2450 Solar Charge Controller PWM With Hybrid System 12V/24V 50A HB
Model DST 2450HB
voltage:12/24V
Rated current:50A.
Method:PWM.
Microprocessor Controlled System.
Programmable Lcd Display.
All Parameters Can be Program From Menu.
UPS In Automatic On/OFF Control
Warranty 1 Year
Memorized The Set Parameters.
Charging Can Be Stopped When Battery Voltage Reaching The Set Value ( charging off volt ).
3 Methods Of Battery Charging. Charge And Full Battery Indicator.
Intelligentized The Temperature Compensation.
Over Charge Protection.
Solar ATS/Hybrid System Control Your UPS InPut 220V
Automatic Detection of voltage Solar Panel & Battery.
UPS Input 220v Can Be Stopped When Battery Voltage & Solar Voltage Reaching The Set Value.
When Solar Panel Volt/Battery Volt Down The Set Value Then Hybrid system Connect The UPS Input With Wapda Electricity.
Intelligent Solar ATS/Hybrid System to minimize the use of Electricity and Maximize The Use of Solar Panel Energy In Order to Reduce Utility Bills.
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch Duel LED & Hold Soft Dimmer for Led Light 12V 3A
Brand Name : Destta Reliablie
Model: DST M12-G11-A30D
Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
Material: electronic components
Size: 50x50mm/1.9×1.9in
Color: Black
Style 1: Short press – open – close
Style 2: Long press to adjust the light brightness, short press to turn on and off
Style 3: Short press the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off
Optional Type: 1, 2, 3, 4
SKU: n/a
Week Deals limited, Just now
%
Hurry up! Offer ends in:
Motion Sensor's, Sensor's
40mm AC 220V Infrared PIR Motion Sensor Automatically Light On Off Sensor
Specifications:
Type: PIR Switch
Color: White
Working Voltage/Frequency:AC100-240V, 50/60Hz
Output power : ≤40W
Photo sensing Setting:≤2Lux, ≤25Lux, 2000Lux
Sensing Distance: 4-6m
Time delaya djustment :15secs 45secs 5mins
Angle Coverage: 110°
Extreme Temperature Using:-10°—+45°
Stand by power consumption:<0.1W
Size:45 mmx 40mm x 25mm
Package Contents:
1 x PIR Motion SensorSwitch
SKU: n/a
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch & Hold Soft Dimmer for Led Light 12V 3A
Brand Name : Destta Reliablie
Model: DST M12-G11-A20
Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
Material: electronic components
Size: 50x50mm/1.9×1.9in
Color: Black
Style 1: Short press – On
Style 2: Long press to adjust the light brightness Low
Style 3: Long press the light brightness High
Style 4: Short press – Off
Optional Type: On/Off With Soft Dimmer
Voltage: 5-12V 3A
Load power: 10W
Sensing Range: 5mm
SKU: n/a
Infrared Remote Controller's
DTA-17031 3D Electric Fireplace Remot Control Unit
Model. 17031
specially design for 3D electric fireplace
Durable and compact in size And Repairable
Control the fireplace with the remote control On-Off
increac the Flame
Reducing Flame
high temperature profile
low temperature shift
on off the Fire
The Remote is very beautiful, small in size and white in color
Performance and Versatility – Multitude of beneficial settings and
operational modes to ensure that it will operate at peak levels of performance and versatility
SKU: n/a
Automatic Day Night Sensor, Sensor's
Electric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
Automatic Day Night Sensor, Sensor's
Electric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
Model No: AS-10-220
Voltages: 220V AC
Rated Current: 10A
The external Material is Plastic
Size: 3.3 x 4.2 x 5cm
Color is White and Blue
Lumination operation
On: less than 30 Lux
Off: less than 150lux
SKU: n/a
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Photo Switch AS-20 AC 220V 10A
Input voltage: AC220V
Maximum load current: 10A
Frequency: 50-60 Hz
Power Consumption: 0.5 W Maximum
Lumination operation
On: less than 30 Lux
Off: less than 150lux
(It can be adjusted according to the requirements
SKU: n/a
Boiler Controller, Water Pump Controller
DTA-11085 Water Level Control Card with Burner Safety and Pressure Safety For Steam Boiler
Boiler Controller, Water Pump Controller
DTA-11085 Water Level Control Card with Burner Safety and Pressure Safety For Steam Boiler
Model No. 11085
Input voltage 220V AC
Output Voltage 220Ac
Rated Current . 15A AC For pump
Has a strong ability to sense water
Time Delay Setting for Pump On
Time Setting for Pressure Switch On
APPLICATIONS
Steam Boiler
Water heaters
SKU: n/a
Boiler Controller, Flame Detector Card
DTA-9081 Burner Controller Unit Flame Rod Sensing
Safe start with DETECT FLAME ROD sensing technology
Custom timings setting for start & ignition & Main valve
work indication with led’s
Air Blower control
poilt & Main Valve control
Single or three trials for ignition
System diagnostic LED
APPLICATIONS
Gas furnaces
Boilers
Commercial cooking
Water heaters
SKU: n/a
Boiler Controller, Ignition Controller
DTA-21025 Spark Igintion Card With Time Delay For Steam Boiler & Commercial cooking 12KVA
Boiler Controller, Ignition Controller
DTA-21025 Spark Igintion Card With Time Delay For Steam Boiler & Commercial cooking 12KVA
Professional 220V High Voltage Electronic Igniter for Gas
Stove/Gas Burner/Gas
Input Voltage: 220V
Output Voltage: 12KVA
Igniting Distance: 5-8mm
Working Frequency: 50HZ
Length Of Output Wire: 800mm
Lifetime: ≥100,000 times
Ignition Material : electronic epoxy resinsealant encapsulating
waterproof and damp proof.
VR to turn off the ignition
SKU: n/a
Different Types Of Sensor's, Sensor's
Aosong original AM2302 Digital Temperature Sensor / Humidity Sensor For Arduino DHT22
Different Types Of Sensor's, Sensor's
Aosong original AM2302 Digital Temperature Sensor / Humidity Sensor For Arduino DHT22
The DHT22 combined temperature and relative humidity sensor provides a simple and low-cost solution.
To differentiate between the two readings, the DHT22 makes use of a simple protocol on a single data pin which is best interpreted by using existing library code. The instructions below show how to connect the DHT22 up to your Particle Argon, and take you through the process of finding and including the right library in your application code using the Web IDE.
This example is based on the Adafruit version that is provided with the library code, and the Photon Maker Kit tutorial linked in the box above.
SKU: n/a
Different Types Of Sensor's, Sensor's
Hand Sweep Sensor Light ON – OFF & Hold Soft Dimmer Control Duel Color
Different Types Of Sensor's, Sensor's
Hand Sweep Sensor Light ON – OFF & Hold Soft Dimmer Control Duel Color
Brand Name : Destta Reliablie
Model: DST M12-G11-A32D
Input Voltage 12V
Output Voltage 12V 3A
Color: Black
Style 1: Hand Sweep– open – close
Style 2: Long Hand Stop to adjust the light brightness, short press to turn on and off
Style 3: Hand Sweep the light brightness to change to weak-medium-strong-off
Style 4: it can control 2 colors of light strips, double output A-B-AB-off
Optional Type: 1, 2, 3, 4
SKU: n/a
Smartphones & Tablets
-
Infrared Beam Active Sensor, Sensor's
IR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Infrared Beam Active Sensor, Sensor'sIR Infrared Beam Sensor with 2 Beams Detector Outdoor Active (ABT-150)
Technical Specifications:
Response speed: 50 to 700m/sec adjustable
Alarm output: 1C relay contact output, contact capability DC30v/0.5A max
Power and voltage: DC12~24V, AC 11~18V
Working temperature: -25 ~ 55 degree C
Tamper output: 1B contact output, DC30V/0.5A max
Optical axis adjust angle(horizontal): 180° (± 90° )
Optical axis adjust angle(vertical): 20° (± 10° )
Weight: 300g for transmitter; 300g for receiver; 1000g for each pack (including bracket)
Valid length: 17CMApplication. Indoor, OutdoorTransmission Mode.CableReceive Frequency.WiredIndoor Detecting Distance.50-150mWorking Temperature.-25 Degree ~ 55 DegreeWired or Wireless.WiredBeams.2 BeamsWorking Principle.Infrared– Relay OutputAlarm Volume (within 1m).Relay OutputHousing Color.BlackOutdoor Detecting Distance.50-150mValid Length.17cmRelay Output.No or NcSKU: n/a -
Infrared Beam Active Sensor, Sensor's
ABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
Infrared Beam Active Sensor, Sensor'sABO-20L Single Beam Detector Active Half Egg Beam Infrared Detector Photoelectric Sensor, Detect Distance: 20m
Item Parameter Model ABL-20L Power supplyDC 10.5V–24V/0.5VMaximum currentTX: 15mA MAX RX: 30mA MAXOptical sourceInfrared PulseInfrared wave length940nmInfrared transmission frequency1.92KHzResponse speed50msAlarm output time≥1sDetection modeBlock off the infrared beamInfrared angle<±10°Infrared distance≤20mWaterproof level IP55 Relay contact capacityAC,DC30V,0.5A maxWorking environmentTemperature: -25°C-+55°C; Humidity: RH95%Product dimension76*49*29mmSKU: n/a -
Boiler Controller, Water Pump Controller
DTA-11099 Water Level Switch For Boiler
- Model No: DTA-11099
- Input Voltage 220V
- Rated Current: 12A Continuously
- It Can be Installed Very Easily
- 2 Wirer Sensing
- When the water touches the High level, the motor should stop
- After leaving the high level, the Motor should turn on after the time
- Microprocessor Based and very Efficient
SKU: n/a -
Battery Charger, Generator Battery Charger
DTA-4072 Battery Charger 24V/5A For Generator
FEATURES
- Model No: DTA-4072
- Input Voltage: 180 t 270V AC
- Out Voltage: 27.6V DC
- Current: 5A
- Short Circuit Protection With Fuse
- 2 Stage Charging for Continuous Connection.
- Over Charge Protection
- Over current Protection.
- Low power consumption at no-load mode
- Reverse Discharge Protection.
- Easy to Install
- Technology: Transformer Based
- Ampere Metre On the Front Panel for Show Battery Charging Status
- Color: Red
- Material: Copper Transformer and Metal Box
- Size: Approx. 210mm x 155mm x 100mm
- DTA-4059 is charger is capable of charging any type of battery attached to the generator
- It automatically controls its amperes when the battery is fully charged
- This charger has the capacity to charge batteries from 15 amps to 250×2 amps.
- This charger is specially designed to slowly charge the continuous battery
- This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a -
Battery Charger, Digital Battery Charger, Generator Battery Charger
DTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
Battery Charger, Digital Battery Charger, Generator Battery ChargerDTA-4158 Battery Charger Digital 24V/30A & 24V/50A For Generator
FEATURES
- Model No: DTA-4158
- Input Voltage: 180 t 270V AC
- Out Voltage: 27.6V DC
- Current: 50A
- Digital Display for Volt and ampere.
- Digital Display for Ampere
- LEDBattery Status show
- Short Circuit Protection With Fuse
- 2 Stage Charging for Continuous Connection.
- Over Charge Protection
- Over current Protection.
- Low power consumption at no-load mode
- Reverse Discharge Protection.
- Two fans have been installed to keep the Battery Charger cool, which Automatically turns on during Heating
- Easy to Install
- Technology: Transformer Based
- Ampere Metre On the Front Panel for Show Battery Charging Status
- 63A ampere switch is used for main power
- 100A ampere switch is used for the DC Output
- The parameters are displayed on the front panel
- Color: Red
- Material: Copper Transformer and Metal Box
- DTA-2450 is charger is capable of charging any type of battery attached to the generator
- It automatically controls its amperes when the battery is fully charged
- This charger has the capacity to charge batteries from 15 amps to 500×2 amps.
- This charger is specially designed to slowly charge the continuous battery
- This charger is made using high quality Parts and a 100% copper wire transformer
SKU: n/a -
Electronic Components, HMI, LCD, PLC & HMI, Students Gallery
TJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
Electronic Components, HMI, LCD, PLC & HMI, Students GalleryTJC4024T032_011R 3.2 inch USART HMI touch screen with GPU font picture configuration screen serial port TFT LCD screen
- Resolution: 400*240
- Serial port mode: 3.3V CMOS
- Working voltage: 4.75-7V
- Diagonal size of display area: 3.2 inch
- Interface mode: 4pin_XH2.54
3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 is a Seamless Human Machine Interface (HMI) solution. 3.2 inch Nextion TFT HMI LCD Touchscreen NX8048K050 that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly…
SKU: n/a
Music Headphones
-
Motion Sensor's, Sensor's
40mm AC 220V Infrared PIR Motion Sensor Automatically Light On Off Sensor
- Specifications:
- Type: PIR Switch
- Color: White
- Working Voltage/Frequency:AC100-240V, 50/60Hz
- Output power : ≤40W
- Photo sensing Setting:≤2Lux, ≤25Lux, 2000Lux
- Sensing Distance: 4-6m
- Time delaya djustment :15secs 45secs 5mins
- Angle Coverage: 110°
- Extreme Temperature Using:-10°—+45°
- Stand by power consumption:<0.1W
- Size:45 mmx 40mm x 25mm
- Package Contents:
- 1 x PIR Motion SensorSwitch
SKU: n/a -
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch & Hold Soft Dimmer for Led Light 12V 3A
- Brand Name : Destta Reliablie
- Model: DST M12-G11-A20
- Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
- Material: electronic components
- Size: 50x50mm/1.9×1.9in
- Color: Black
- Style 1: Short press – On
- Style 2: Long press to adjust the light brightness Low
- Style 3: Long press the light brightness High
- Style 4: Short press – Off
- Optional Type: On/Off With Soft Dimmer
- Voltage: 5-12V 3A
- Load power: 10W
-
Sensing Range: 5mm
SKU: n/a -
Infrared Remote Controller's
DTA-17031 3D Electric Fireplace Remot Control Unit
- Model. 17031
- specially design for 3D electric fireplace
- Durable and compact in size And Repairable
- Control the fireplace with the remote control On-Off
- increac the Flame
- Reducing Flame
- high temperature profile
- low temperature shift
- on off the Fire
- The Remote is very beautiful, small in size and white in color
- Performance and Versatility – Multitude of beneficial settings and
- operational modes to ensure that it will operate at peak levels of performance and versatility
SKU: n/a -
-
Automatic Day Night Sensor, Sensor's
Electric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
Automatic Day Night Sensor, Sensor'sElectric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
- Model No: AS-10-220
- Voltages: 220V AC
- Rated Current: 10A
- The external Material is Plastic
- Size: 3.3 x 4.2 x 5cm
- Color is White and Blue
- Lumination operation
- On: less than 30 Lux
- Off: less than 150lux
SKU: n/a -
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Automatic Day Night Sensor, Sensor'sLight Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
- Photo Switch AS-20 AC 220V 10A
- Input voltage: AC220V
- Maximum load current: 10A
- Frequency: 50-60 Hz
- Power Consumption: 0.5 W Maximum
- Lumination operation
- On: less than 30 Lux
- Off: less than 150lux
-
(It can be adjusted according to the requirements
SKU: n/a
Top Categories this Week
Laptops & Computers
Home Enternteinment
-
Motion Sensor's, Sensor's
40mm AC 220V Infrared PIR Motion Sensor Automatically Light On Off Sensor
- Specifications:
- Type: PIR Switch
- Color: White
- Working Voltage/Frequency:AC100-240V, 50/60Hz
- Output power : ≤40W
- Photo sensing Setting:≤2Lux, ≤25Lux, 2000Lux
- Sensing Distance: 4-6m
- Time delaya djustment :15secs 45secs 5mins
- Angle Coverage: 110°
- Extreme Temperature Using:-10°—+45°
- Stand by power consumption:<0.1W
- Size:45 mmx 40mm x 25mm
- Package Contents:
- 1 x PIR Motion SensorSwitch
SKU: n/a -
Mirror Touch Sensor, Sensor's
Mirror Touch Sensor Switch & Hold Soft Dimmer for Led Light 12V 3A
- Brand Name : Destta Reliablie
- Model: DST M12-G11-A20
- Item Type: Mirror Touch Sensor Switch & Hold Soft Dimmer
- Material: electronic components
- Size: 50x50mm/1.9×1.9in
- Color: Black
- Style 1: Short press – On
- Style 2: Long press to adjust the light brightness Low
- Style 3: Long press the light brightness High
- Style 4: Short press – Off
- Optional Type: On/Off With Soft Dimmer
- Voltage: 5-12V 3A
- Load power: 10W
-
Sensing Range: 5mm
SKU: n/a -
Infrared Remote Controller's
DTA-17031 3D Electric Fireplace Remot Control Unit
- Model. 17031
- specially design for 3D electric fireplace
- Durable and compact in size And Repairable
- Control the fireplace with the remote control On-Off
- increac the Flame
- Reducing Flame
- high temperature profile
- low temperature shift
- on off the Fire
- The Remote is very beautiful, small in size and white in color
- Performance and Versatility – Multitude of beneficial settings and
- operational modes to ensure that it will operate at peak levels of performance and versatility
SKU: n/a -
-
Automatic Day Night Sensor, Sensor's
Electric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
Automatic Day Night Sensor, Sensor'sElectric Photo Sensor Automatic Auto On Off Street Light Lighting Switch Electric Sensor Switch Photo Operated Control Sensor Solar Switches AC 220V 10A
- Model No: AS-10-220
- Voltages: 220V AC
- Rated Current: 10A
- The external Material is Plastic
- Size: 3.3 x 4.2 x 5cm
- Color is White and Blue
- Lumination operation
- On: less than 30 Lux
- Off: less than 150lux
SKU: n/a -
Automatic Day Night Sensor, Sensor's
Light Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
Automatic Day Night Sensor, Sensor'sLight Control Swith Photo Sensor , Automatic Auto On Off Street Light Switch AS 20 Waterproof
- Photo Switch AS-20 AC 220V 10A
- Input voltage: AC220V
- Maximum load current: 10A
- Frequency: 50-60 Hz
- Power Consumption: 0.5 W Maximum
- Lumination operation
- On: less than 30 Lux
- Off: less than 150lux
-
(It can be adjusted according to the requirements
SKU: n/a -
Boiler Controller, Water Pump Controller
DTA-11085 Water Level Control Card with Burner Safety and Pressure Safety For Steam Boiler
Boiler Controller, Water Pump ControllerDTA-11085 Water Level Control Card with Burner Safety and Pressure Safety For Steam Boiler
- Model No. 11085
- Input voltage 220V AC
- Output Voltage 220Ac
- Rated Current . 15A AC For pump
- Has a strong ability to sense water
- Time Delay Setting for Pump On
- Time Setting for Pressure Switch On
- APPLICATIONS
- Steam Boiler
- Water heaters
SKU: n/a -
Boiler Controller, Flame Detector Card
DTA-9081 Burner Controller Unit Flame Rod Sensing
- Safe start with DETECT FLAME ROD sensing technology
- Custom timings setting for start & ignition & Main valve
- work indication with led’s
- Air Blower control
- poilt & Main Valve control
- Single or three trials for ignition
- System diagnostic LED
- APPLICATIONS
- Gas furnaces
- Boilers
- Commercial cooking
- Water heaters
SKU: n/a