AVR, Generator
DTA-525 Consealed AVR Automatic Voltage Regulator For Generator
Model No DTA-525 Consealed
- This model is specially designed to protect against moisture and shocks
- Inpt Voltage: 220V AC
- Phase: Single 1
- Frecuency:Ā 50hz ā 60Hz
- Output Voltage: 0V To 90V Dc Maximum
- Current Max: 25A DC
- Continuous 13A-Dc Excitation Current
- Controls: Volt , Stab
- Quick response ( 20 ms )
- Thyristor Control Technology
- Suitable for 10 KVA 1000 KVA Brushless Generator
- Requires Only 2V-AC Residual Voltage to Buildup Alternator Voltage
- Easy to Install
- Low Cost
₨6,000
Based on 0 reviews
Be the first to review “DTA-525 Consealed AVR Automatic Voltage Regulator For Generator”
Related products
-
AMF / ATS Controller, Generator
DTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
AMF / ATS Controller, GeneratorDTA-210 AMF/ATS 2 Wapda & 1 Generator Automatic Load Transfer and Generator Start/Stop Unit
- Aoutmatic 2 main Lines And Generator Control Card
- This card is Specially Designed to Control Two WAPDA Meters and One Generator
- Meter 1 and Meter 2 automatically switch with time Delay Setting
- In case of both line shutdown, it starts the generator itself and shifts the load to the generator.
- If in-wapda 2 comes on while the generator is running, it shuts down the generator and turns it into Metter 2.and shifts the load to the Metter 2.
- In case of both Line 1 and Line 2 coming, the load of Line 1 will be transferred automatically
- Variables to Onload line one, line two, and line three
- Self On/Off Time Setting
- Genset On Load Time & Genset Off Load Time
- Main On Load TimeĀ
- Generator Cool Down Time
- Failed To Start Indication LED
- Excellent Ability to Start and Stop the Generator
- DC Supply: 12 Volts, (+) and (-) Terminals.
- Indicators to show card performance
- Capability to transfer loads without DC 12 volts
SKU: n/a -
AVR, Generator
Leroy Somer AVR R438 Automatic Voltage Regulator For Generator
Input voltage0-110V: 95-140V,
0-220V: 170-260V, 0-380V: 340-520V,
frequency50/60 Hz
,Rated overload current8 A up to 10 sec,
External voltage regulation0.47KĪ©/0.5W: Ā±5%, 1.5KĪ©/0.5W: Ā±10%.Operating temperaturefrom -20Ā°Š” to +70Ā°Š”,
Dimensions140x124x50 mm.Weight750
Voltage Regulation Ā±0.5% Remote voltage adjustment range Ā±0.5% Short circuit capability 3 x Irated for 10 seconds Standard power supply AREP or PMG Rated overload current 8 A – 10 s Voltage sensing 5 VA isolated via transforme 0-110V terminals 95 to 140V 0-220V terminals 170 to 260V 0-380V terminals 340 to 520V Voltage regulation Ā± 1% Current sensing C.T.2.5VA cl1,secondary 1 A Voltage sensing 95~140 volts (50/60 Hz) 170~260 volts (50/60 Hz) 340~520 volts (50/60 Hz) Fit for 1000 series generator 2000 series generator 3000 series generator SKU: n/a -
AVR, Generator
R230 AVR Automatic Voltage Regulator for Single-Phase Two-Wire Generator
- 100% brand new and high quality.
- This product is a AVR(Automatic Voltage Regulator) for brushless alternator with adjustable voltage.
- The regulator monitors the exciter excitation current as a function of the alternator output voltage.
- Very simple in design, the alternator with shunt excitation has no sustaining short-circuit capacity.
- Made with flame retardant and heat resisting material, stable and reliable to use.
- Input
Voltage 85-139 VAC
Frequency 50-60 Hz nominal
Output
Voltage max 75 V DC at 100V AC input
Current continuous 4A DC
Intermittent 8A
Resistance 15 ohms minimum
Regulation +/- 0.5%
SKU: n/a -
AVR, Generator
R448 AVR for Leroy Somer | Automatic Voltage Regulator For Generator
- Normal AVR supply power:2 auxiliary windings (X1, X2, ans Z, Z2)
- Shunt supply: 150V – 5060Hz Rated overload current:10A, 10s.
- Electronic built- in )overload, short circuit, and loss of sensing) protecting: If excitation current raises over 10 amps for more then 10 seconds, excitation current will drop automatically to about 1A.
- To reset AVR protection, the generator must be stopped )or by cutting supply voltage to the AVR). Protection of power inputs by fuses F1
- Voltage sensing: 5VA insulated transformer with input voltage taps at: Terminals 0 – 110V = 95 to 140V. Terminals 0 – 220V = 170 to 260V. Terminals 0 – 380V = 340 to 520V
SKU: n/a
There are no reviews yet.